Flipmicro – 3 Inch

Flipmicro 3 presents micro freestyle performance with full sized VTX component capability...

In our testing the 3" prop was ideal for micro builds which could carry full sized digital video like the DJI O4 Pro - giving great performance with a full build weight around 220g. This gives not only good power to weight but also drag to weight. Drag to weight based around prop size and mass is critical for a controllable descent rate and trick momentum - an important but rarely discussed component of freestyle physics.

Flying with 4s or 6s this is a slightly bigger and louder micro than the 2.5" - with a thicker 3mm lower plate sharing the rigid quasi-isotropic layout for diagonal stiffness.

However this is still a micro capable of karen-safe flying in parks and other pedestrian spots where sub 250g is the rule...and it's specialisation is rocking a full sized VTX in a small package with great freestyle performance.

Features:

• Custom quasi-isotropic layup T700 3mm carbon base plate - great directional stiffness, strength and low noise
• Classic freestyle layout providing top mount lipo and squashed X Supafly geometry for legit mini freestyle feel
• Room for full sized DJI O4 Pro, Walksnail and HDZero VTX
• Plenty of build room including for separate receiver means less reliance on rare and problematic AIO with integrated receivers
• GPS mount and lipo protector horn option
• Supafly tunes for 4s now with 6s coming soon....

Frame fits the following components:

• Cameras: 14mm Nano size to 20mm width with many supporting inserts in the 3d parts.
• Electronics stack: 25x25 AIO in square or diagonal pattern and 20x20. Recommended:  JHEMCU H743HD AIO (buy on this page for kit discount)
• Motors: 9x9mm mounting pattern. Recommended: RCinpower 1404 4600kv or Deepspace Aether 1404 4600kv 
• Props: HQProp T3x3x3
• Video Systems: DJI O4 Pro, DJI O4 Lite Wide, HDZero Whoop v2 with 90fps camera, Walksnail Mini, Rush Tank Tiny, Foxeer Reaper Nano etc...
• Receiver: Radiomaster RP1 or Happymodel EP1 or similar ELRS receiver
• Lipo: 4s 550 - 700mah or 6s 300 - 550mah
• Ideal final weight 210 - 220g ready to fly

Frame kit Includes:

• 3mm thick chamfered carbon with quasi-isotropic layup
• 1.5mm camera and top plates
• M2 screws and standoffs
• Nylon and steel stack nuts
• Foam lightweight lipo matt
• Two lightweight lipo straps
• Motor screws
• Supafly sticker
• Downloadable resources: Frame assembly guide (coming soon), Customer tuning, 3d stl parts for printable accessories

Dry frame weight with TPU cam mount = 65g

3d Part build kit includes:

• Bumpers
• 4x Arm guard/skids (stretch-slip on)
• ELRS / Crossfire radio antenna mounts
• Capacitor mount
• 25.5x25.5 and 20x20 TPU shelf - optional receiver mount on top of AIO
• Lightweight generic VTX antenna mount (uses zip tie to clamp) 1.4g (option to use zip ties on top plate also)

Additional TPU parts:

• Lipo Horn - protects lipo and makes it look cool
• GPS mount - for nano GPS (16x12mm)
• DJI O4 Pro Cradle and Antennae Mounts